1.0"-14 THREAD

Parts List

ImageDescriptionReplacesPart #
1.0"-14 TPI Forging with tapered hole and LH Threads 1.0"-14 TPI Forging with tapered hole and LH Threads

12.500" center to end
Includes Jam Nut

  RP66485
1.0"-14 TPI Forging with RH Threads 1.0"-14 TPI Forging with RH Threads

5.750" center to end
Includes Jam Nut

  RP66470
1.0"-14 TPI Forging with LH Threads 1.0"-14 TPI Forging with LH Threads

5.750" center to end
Includes Jam Nut

  RP66469
Stud Cartridge - 0.657" Small Taper Stud Cartridge - 0.657" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

ES3624
ES800594
DS300005
RP65794
Stud Cartridge - 0.675" Small Taper - Tie Rod End Stud Cartridge - 0.675" Small Taper - Tie Rod End

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting

2010R
2010L
2233L
RP66399
Stud Cartridge - 0.715" Small Taper - Pitman Arm End Stud Cartridge - 0.715" Small Taper - Pitman Arm End

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting

2026R
2027L
RP66400
Stud Cartridge - 0.750" Straight Stud Stud Cartridge - 0.750" Straight Stud

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting
For knuckles previously drilled out for heim joints.

3/4" Heim RP66512
2 2" Impact Socket

For cartridge installation & removal - 1/2" Drive, 6 Point

RP69248
1.0"-14 TPI Threaded Insert with RH Threads 1.0"-14 TPI Threaded Insert with RH Threads

For 1.25" Internal Diameter (ID) sleeves
1.250" Wrench Flats

  RP29464
1.0-14 TPI Threaded Insert with LH Threads 1.0-14 TPI Threaded Insert with LH Threads

For 1.25" Internal Diameter (ID) sleeves
1.250" Wrench Flats

  RP29465
Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down

For use with RP65794, RP66399, RP66400 cartridges.
NOTE: Not for use on drag link - for tie rod assembly only

  RP66974
Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down

For use with RP66512 cartridge.
NOTE: Not for use on drag link - for tie rod assembly only

How to Install
  RP66583
Serrated Belleville Washer Serrated Belleville Washer

Lock 1.0" jam nuts to the sleeve

RP69244
1:8 Reamer 1:8 Reamer

1.5 in/ft reamer - Small taper: 0.438", large taper: 0.813"

  RP69226
1:6 Reamer 1:6 Reamer

2.0 in/ft reamer - Small taper: 0.375", large taper: 1.125"

  RP69229
1:10 Reamer 1:10 Reamer

1.2 in/ft reamer (METRIC) - Small taper: 0.437", large taper: 0.887"

  RP69231