1.25"-12 THREADS

Parts List

ImageDescriptionReplacesPart #
1.25"-12 Forging with RH Threads 1.25"-12 Forging with RH Threads

1.39" Offset - 12.250" center to end

TBD RP65790
1.25"-12 Forging with LH Threads 1.25"-12 Forging with LH Threads

1.39" Offset - 12.250" center to end

TBD RP65791
1.25"-12 Forging with RH Threads 1.25"-12 Forging with RH Threads

2" Offset - 12.070" center to end

RP66616
1.25"-12 Forging with LH Threads 1.25"-12 Forging with LH Threads

2" Offset - 12.070" center to end

RP66617
1.25"-12 Forging with LH Threads 1.25"-12 Forging with LH Threads

Straight - 12.250" center to end

TBD RP65788
1.25"-12 Forging with RH Threads 1.25"-12 Forging with RH Threads

Straight - 12.250" center to end

  RP65907
1.25"-12 TPI Forging with LH Threads 1.25"-12 TPI Forging with LH Threads

Straight - 5.750" center to end
Includes Jam Nut

  RP66471
1.25"-12 TPI Forging with RH Threads 1.25"-12 TPI Forging with RH Threads

Straight - 5.750" center to end
Includes Jam Nut

  RP66472
1.25"-12 TPI Forging with tapered hole and LH Threads 1.25"-12 TPI Forging with tapered hole and LH Threads

12.500" center to end
Includes Jam Nut

  RP66487
1.25"-12 Forging with RH Threads 1.25"-12 Forging with RH Threads

Offset - 11.909" center to end

TBD RP65789
Stud Cartridge - 0.657" Small Taper Stud Cartridge - 0.657" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

ES3624
ES800594
DS300005
RP65794
Stud Cartridge - 0.675" Small Taper - Tie Rod End Stud Cartridge - 0.675" Small Taper - Tie Rod End

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting

2010R
2010L
2233L
RP66399
Stud Cartridge - 0.715" Small Taper - Pitman Arm End Stud Cartridge - 0.715" Small Taper - Pitman Arm End

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting

2026R
2027L
RP66400
2 2" Impact Socket

For cartridge installation & removal - 1/2" Drive, 6 Point

RP69248
1.25"-12 TPI Jam Nut with RH Threads 1.25"-12 TPI Jam Nut with RH Threads

1.8125" Wrench Flats

  RP65913
1.25"-12 TPI Jam Nut with LH Threads 1.25"-12 TPI Jam Nut with LH Threads

1.8125" Wrench Flats

  RP65914
1.25"-12 TPI Threaded Insert with RH Threads 1.25"-12 TPI Threaded Insert with RH Threads

For 1.50" Internal Diameter (ID) sleeves
1.750" Wrench Flats

  RP66442
1.25"-12 TPI Threaded Insert with LH Threads 1.25"-12 TPI Threaded Insert with LH Threads

For 1.50" Internal Diameter (ID) sleeves
1.750" Wrench Flats

  RP66443
Serrated Belleville Washer Serrated Belleville Washer

Lock 1.25" jam nuts to the sleeve

RP66639
Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down

For use with RP65794, RP66399, RP66400 cartridges.
NOTE: Not for use on drag link - for tie rod assembly only

  RP66974
1:8 Reamer 1:8 Reamer

1.5 in/ft reamer - Small taper: 0.438", large taper: 0.813"

  RP69226
1:6 Reamer 1:6 Reamer

2.0 in/ft reamer - Small taper: 0.375", large taper: 1.125"

  RP69229
1:10 Reamer 1:10 Reamer

1.2 in/ft reamer (METRIC) - Small taper: 0.437", large taper: 0.887"

  RP69231